中國醫藥大學機構典藏 China Medical University Repository, Taiwan:Item 310903500/5836
English  |  正體中文  |  简体中文  |  全文筆數/總筆數 : 29490/55136 (53%)
造訪人次 : 1998662      線上人數 : 500
RC Version 7.0 © Powered By DSPACE, MIT. Enhanced by NTU Library IR team.
搜尋範圍 查詢小技巧：
  • 您可在西文檢索詞彙前後加上"雙引號"，以獲取較精準的檢索結果
  • 若欲以作者姓名搜尋，建議至進階搜尋限定作者欄位，可獲得較完整資料
    •  進階搜尋
    主頁 ‧ 登入 ‧ 上傳 ‧ 說明 ‧ 關於CMUR ‧ 管理 到手機版


    請使用永久網址來引用或連結此文件: http://ir.cmu.edu.tw/ir/handle/310903500/5836


    題名: Chemical constituents in particulate emissions from an integrated iron and steel facility
    作者: (Tsai, J.H.);(Chen, C.Y);(Lin, K.H);(Ding, J.Y);(Chao, C.G);江鴻龍*
    貢獻者: 公共衛生學院風險管理學系
    關鍵詞: Integrated iron/steel plant;Airborne particle;Element species;Water-soluble ions;Polyaromatic hydrocarbons;Organic carbon;Elemental carbon
    日期: 2007-08
    上傳時間: 2009-08-25 14:25:01 (UTC+8)
    摘要: Particle emissions from four integrated iron and steel plant processes, i.e., coke making, sintering, cold forming, and hot forming, were investigated in this study. Particle compositions of 21 element species, 11 ionic species, elemental carbon (EC), organic carbon (OC) and 16 polyaromatic hydrocarbons (PAHs) were analyzed to create “fingerprints” of the particles emitted from various processes in an integrated iron and steel plant. Results indicated that element compositions (0.11–0.42 g/g), water-soluble ions (0.34–0.52 g/g), elemental carbon (0.008–0.14 g/g), organic carbon (0.02–0.06 g/g) and PAHs (0.52–6.2 mg/g) contributed to the particle mass. In general, sulfur had a higher mass contribution than the other elements, which resulted from the use of coal, flux, heavy oil, and many recycled materials in the iron and steel plant. The particle mass contribution of potassium and chlorine in the sinter plant was higher than in other processes; this may be attributed to the lower boiling point and volatility of potassium. In addition, many recycled materials were fed into the sinter plant, causing a high concentration of potassium and chlorine in the particle phase. Eight PAH compounds were analyzed in the four processes. The carcinogenic compound Benzo(a)pyrene (BaP) was detectable only in the sintering process.
    關聯: JOURNAL OF HAZARDOUS MATERIALS(147)111 ~119
    顯示於類別:[健康風險管理學系] 期刊論文

    文件中的檔案:

    檔案 大小格式瀏覽次數
    0KbUnknown488檢視/開啟


    在CMUR中所有的資料項目都受到原著作權保護.

    TAIR相關文章

     

    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library IR team Copyright ©   - 回饋