English  |  正體中文  |  简体中文  |  全文筆數/總筆數 : 29490/55136 (53%)
造訪人次 : 1522476      線上人數 : 405
RC Version 7.0 © Powered By DSPACE, MIT. Enhanced by NTU Library IR team.
搜尋範圍 查詢小技巧:
  • 您可在西文檢索詞彙前後加上"雙引號",以獲取較精準的檢索結果
  • 若欲以作者姓名搜尋,建議至進階搜尋限定作者欄位,可獲得較完整資料
  • 進階搜尋
    主頁登入上傳說明關於CMUR管理 到手機版
    請使用永久網址來引用或連結此文件: http://ir.cmu.edu.tw/ir/handle/310903500/459


    題名: 太乙膏貼布的製劑學研究;Pharmaceutical studies of Tai-Yi Kao Plaster
    作者: 林佩靜;Pei-Ching Lin
    貢獻者: 中國醫藥大學:中國藥學研究所博士班
    關鍵詞: 太乙膏貼布;Pharmaceutical;Tai-Yi Kao Plaster
    日期: 2006-05-26
    上傳時間: 2009-08-11 10:25:18 (UTC+8)
    摘要: 太乙膏源出於《外科正宗》,由肉桂、白芷、當歸、人參、赤芍藥、生地黃、大黃、土木鱉、阿魏、輕粉、柳枝、槐枝、血餘、東丹、乳香、没藥、麻油所組成。臨床上常用於風濕痠痛, 筋骨痠痛, 跌打損傷等證。在本研究中以太乙膏加減方配合不同的聚合物製成水性及油性貼布,再進行一系列評估。首先以麻油、50%乙醇及水三種不同的抽提溶媒進行太乙膏成分之抽提,結果顯示,以50%乙醇抽提效果為佳,其次為水,麻油抽提效果最差。
    抽提後配合Cabopol 940、Acacia及Resin三種不同基劑製成九種貼布,進行釋放量評估。以芍藥苷為太乙膏體外溶離之指標成分,利用本實驗已確效的HPLC定量法,移動相為甲醇及水(40:60),層析管柱為C18, 流速為0.8 ml/min,檢測波長為230 nm,內標準品為Methylparaben,進行溶離後的含量測定。各配方組成間以E1及E2的釋放量最好,S3無法檢測到指標成分為最差。綜合結果顯示,以50%乙醇濃縮抽提液配合水性基劑(Carbopol 940及Acacia)可得到較好的釋放量,其中配合Acacia的釋放量又略高於Cabopol 940。因此E2配方組成(50% 乙醇抽提配合Acacia)的貼片,為本實驗製貼片的最佳條件。 

    Tai-Yi Kao Plaster(TYK Plaster) is a traditional Chinese medicine, formulation containing Cinnamon、Dahurian angelica root、Angelica root、Ginseng、Red peony root、Rehmannia root、Myrrh and Sesame oil etc. , It was widely used in the treatment of muscles and bones ache、such as injuries from falls、contusions and strains. In this study, several formulations of TYKP Plaster were evaluated. The first, Extract with different solvents . Result show, extract with 50% ethanol result as good, secondly it is water, the worst is the sesame oil extract the result.
    The different extracts of TYK cooperate with Cabopol 940、Acacia and Resin to manufacture the transdermal delivery system. Then explore the release of Paeoniflorin by dissolution test. A simple and sensitive HPLC method was developed for simultaneous determination of the active constituents of TYK Plaster, Paeoniflorin. The 5ODS column and the mobile phase consisted of Methanol and Water (40:60) was used. Flow rate was 0.8 ml/min. The monitoring wavelength was 230nm, respectively.
    Internal standard was Methylparaben.
    Every prescription makes up a release amount with E1 and E2 best, S3 is unable to measure for being worst. By comparing the physical properties and dissolution data, the best formulation of rapid released TYK Plaster was E2. It was composed of extracts with 50% ethanol and polymer
    with Acacia was chosed.
    顯示於類別:[中國藥學研究所(已停用)] 博碩士論文

    文件中的檔案:

    檔案 描述 大小格式瀏覽次數
    cmu-95-9362014-1.pdf720KbAdobe PDF2048檢視/開啟
    index.html0KbHTML62檢視/開啟


    在CMUR中所有的資料項目都受到原著作權保護.

    TAIR相關文章

     


    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library IR team Copyright ©   - 回饋