The combined regulation of estrogen and cyclic tension on fibroblast biosynthesis derived from anterior cruciate ligament

中國醫藥大學機構典藏 China Medical University Repository, Taiwan > 台中附設醫院 > 期刊論文 > Item 310903500/29887

jsp.display-item.identifier=請使用永久網址來引用或連結此文件: http://ir.cmu.edu.tw/ir/handle/310903500/29887

题名:	The combined regulation of estrogen and cyclic tension on fibroblast biosynthesis derived from anterior cruciate ligament
作者:	Lee, CY;Liu, XH;Smith, CL;Zhang, XL;Hsu, HC;Wang, DY;Luo, ZP
贡献者:	附設醫院骨科部;Baylor Coll Med, Dept Orthoped Surg, Houston, TX 77030 USA;China Med Univ Hosp, Dept Orthopaed Surg, Taichung, Taiwan;Baylor Coll Med, Dept Cell Biol, Houston, TX 77030 USA;Baylor Coll Med, Dept Pediat Hematol & Oncol, Houston, TX 77030 USA
日期:	2004
上传时间:	2010-09-24 14:44:47 (UTC+8)
出版者:	ELSEVIER SCIENCE BV
摘要:	Objectives. The purpose of this study was to evaluate the effects of (1) various impression materials, (2) different storage times and (3) the proportion of inorganic filter on the accuracy and stability of elastometric impression materials. Methods. The impression materials studied included three alginate impression materials (Algiace Z, CAVEX and Jeltrate), five commercial silicone impression materials (Aquasil, Exaflex regular type, Express, Coltex fine and Rapid liner) and two experimental silicone impression materials designed for this study (KE106A and KE106B). Impressions were made of 10 metal dies that mimicked prepared crowns. After an impression was taken, dental stone was immediately poured into the alginate impressions, white the silicone impressions was poured 30 min later and waited for 1 h for setting. The second and third stone dies were made 1 and 24h later, respectively. The diameters of the occlusal surfaces of the metal dies and stone casts were determined using photographs of the surfaces taken with a Kodak DC 290 digital. camera. The pictures were then measured using a photomicrograph digitized integration system to calculate any discrepancy. Because each impression was used to make three rounds of stone dies, two-factor mixed factorial, ANOVA was used to evaluate the effect of materials and storage time on the accuracy of the stone casts. The simple effects analysis, combined with multiple comparisons considering the per family type I error rate, was performed following confirmation that an interaction between the two factors was significant. Results. The results showed that: (1) there was a significant interaction effect between materials and storage times on the accuracy of the impressions. (2) Two addition type silicone materials, Aquasil and Exaflex, had the greatest accuracy and stability. (3) The experimental material KE106A had the least accuracy in the first and second rounds and the alginate impression material CAVEX had the least accuracy in the third round. (4) The stabilities of CAVEX and Jeltrate were the least consistent of the 10 materials and decreased significantly with storage time. (5) When the experimental material had a low proportion of filter (KE106A), there was a significantly greater dimensional discrepancy compared to the same material with a higher proportion of filter (KE106B). Conclusions. The accuracies varied among the 10 impression materials over three rounds. Of all the materials, the addition type silicone materials, Aquasil and Exaflex, had relatively greater accuracy and stability. The discrepancy of the alginate impression materials increased with storage time. The large loading of filter showed less discrepancy. (C) 2004 Elsevier Ltd. All rights reserved.
關聯:	MATRIX BIOLOGY 23(5):323-329
显示于类别:	[台中附設醫院] 期刊論文

文件中的档案:

没有与此文件相关的档案.

在CMUR中所有的数据项都受到原著作权保护.

TAIR相关文章

数据加载中.....