English  |  正體中文  |  简体中文  |  全文筆數/總筆數 : 29490/55136 (53%)
造訪人次 : 1904321      線上人數 : 533
RC Version 7.0 © Powered By DSPACE, MIT. Enhanced by NTU Library IR team.
搜尋範圍 查詢小技巧:
  • 您可在西文檢索詞彙前後加上"雙引號",以獲取較精準的檢索結果
  • 若欲以作者姓名搜尋,建議至進階搜尋限定作者欄位,可獲得較完整資料
  • 進階搜尋
    主頁登入上傳說明關於CMUR管理 到手機版
    請使用永久網址來引用或連結此文件: http://ir.cmu.edu.tw/ir/handle/310903500/29767


    題名: Lymphoepithelioma-like cholangiocarcinoma - An Epstein-Barr virus-associated tumor
    作者: Jeng, YM;Chen, CL;Hsu, HC
    貢獻者: 附設醫院病理部;Natl Taiwan Univ Hosp, Dept Pathol, Taipei 100, Taiwan;China Med Coll Hosp, Dept Pathol, Taichung, Taiwan
    日期: 2001
    上傳時間: 2010-09-24 14:42:12 (UTC+8)
    出版者: LIPPINCOTT WILLIAMS & WILKINS
    摘要: This study was designed to evaluate improvements in the mechanical properties of acrylic resin following reinforcement with three types of fiber. Polyester fiber (PE), Kevlar fiber (KF), and glass fiber (GF) were cut into 2, 4, and 6 mm lengths and incorporated at concentrations of 1, 2, and 3% (w/w), The mixtures of resin and fiber were cured at 70 degreesC in a water bath for 13 h, then at 90 degreesC far 1 h, in 70 x 25 x 15 mm stone molds, which were enclosed by dental flasks, The cured resin blocks were cut to an appropriate size and tested for impact strength and bending strength following the methods of ASTM Specification No. 256 and ISO Specification No. 1567, respectively. Specimens used in the impact strength test were reused for the Knoop hardness test. The results showed that the impact strength tended to be enhanced with fiber length and concentration, particularly PE at 3% and 6 mm length, which was significantly stronger than other formulations. Bending strength did not change significantly with the various formulations when compared to a control without fiber. The assessment of Knoop hardness revealed a complex pattern for the various formulations. The Knoop hardness of 3%, 6 mm PE-reinforced resin was comparable to that of the other formulations except for the control without fiber, but for clinical usage this did not adversely affect the merit of acrylic denture base resin, It is concluded that, for improved strength the optimum formulation to reinforce acrylic resin is by incorporation of 3%, 6 mm length PE fibers. (C) 2001 John Wiley & Sons, Inc.
    關聯: AMERICAN JOURNAL OF SURGICAL PATHOLOGY 25(4):516-520
    顯示於類別:[台中附設醫院] 期刊論文

    文件中的檔案:

    沒有與此文件相關的檔案.



    在CMUR中所有的資料項目都受到原著作權保護.

    TAIR相關文章

     


    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library IR team Copyright ©   - 回饋